DIY Wood Burning Tent Stove: The Ultimate Guide to Staying Warm and Cozy

Are you an avid camper or outdoor enthusiast looking for a way to stay warm and comfortable in your tent? A DIY wood burning tent stove may be the perfect solution for you. These stoves are relatively inexpensive to build and can provide a significant amount of heat, making them a great option for cold-weather camping.

Benefits of a DIY Wood Burning Tent Stove:

Stay warm and comfortable in your tent even in cold weather

Save money on heating costs

Create a cozy and inviting atmosphere

Extend your camping season

Reduce your environmental impact

How to Build a DIY Wood Burning Tent Stove:

Building a DIY wood burning tent stove is a relatively simple process. You will need a few basic materials and tools, and you can follow the steps outlined in this guide to get started.

Materials You'll Need:

Material	Quantity
Sheet metal	1/16-inch thick
Firebricks	8
Stovepipe	6-inch diameter
Damper	6-inch
Screws	1/2-inch self-tapping
Nuts	1/2-inch
Bolts	1/2-inch
Washers	1/2-inch
Gasket material	1/4-inch thick

Tools You'll Need:

Tool
Tin snips
Drill
Rivet gun
Measuring tape
Pencil
Safety glasses

Step-by-Step Instructions:

Cut the sheet metal. You will need to cut the sheet metal to the following dimensions:
- Side panels: 12 inches x 18 inches
- Rear panel: 12 inches x 18 inches
- Front panel: 12 inches x 16 inches
- Bottom panel: 12 inches x 16 inches
- Top panel: 12 inches x 16 inches

Assemble the stove. Place the side panels on the bottom panel and secure with screws. Attach the rear panel to the side panels and secure with screws. Attach the front panel to the side panels and secure with screws. Attach the top panel to the side panels and secure with screws.

Create the firebox. Place the firebricks inside the stove to create the firebox. The firebricks should be arranged so that they create a U-shape.

Install the stovepipe. Attach the damper to the top of the stove. Insert the stovepipe into the damper and secure with screws. The stovepipe should extend out of the tent roof.

Test the stove. Once you have assembled the stove, it is important to test it to make sure it is working properly. Burn a small amount of wood in the stove and check for any leaks. If you see any leaks, seal them with gasket material.

Tips and Tricks:

Use dry, seasoned wood for best results.

Start a small fire and gradually add more wood as needed.

Never leave the stove unattended.

Open the damper to increase the airflow and heat output.

Close the damper to reduce the airflow and heat output.

Keep the stove clean to prevent creosote buildup.

Store the stove in a dry place when not in use.

DIY Wood Burning Tent Stove: The Ultimate Guide to Staying Warm and Cozy